Blog
How to Configure Peplink Layer 2 SpeedFusion VPN
21/10/2020
SpeedFusion and PepVPN can operate in layer 2 mode, bridging both ends of a VPN to create a single Ethernet LAN. This allows you to extend your local network and easily run applications that are LAN-only or difficult to route, such as:
- Zeroconf / Bonjour
- AirPlay
- AirPrint
- Windows printer and file sharing network discovery
To use this feature, navigate to Network > Network Settings and select the interface you wish to bridge
Peplink Forward Error Correction (FEC)
21/10/2020
Available from firmware version 8.0 for Peplink routers with a SpeedFusion WAN Smoothing license.
Introduction
When using multicast applications on lossy WAN connections the performance can suffer. To overcome these problems Peplink introduced WAN smoothing, but WAN smoothing has an overhead of at least 50%.
This is not always desirable when there isn’t enough bandwidth available. Peplink has therefore introduced Forward Error Correction in Firmware 8.0
FEC is a cousin of WAN smoothing but it consumes less data. It is useful for bandwidth sensitive applications such as mobile streaming.
TRO620 - Cellular and 802.11 Mesh Router
14/10/2020
What is SD-WAN?
06/10/2020
One-Device Retail Connectivity Solution
06/10/2020
The Balance 30 Pro (SD-WAN Branch Router with LTEa Failover) can handle all your networking needs. With the PoE activation kit, its four PoE GE LAN ports can connect and power your payment terminal, IP phones, Wi-Fi hotspots. The Balance 30 Pro has one cellular WAN (2x SIM slots) for automatic failover and two Ethernet connections, ensuring that your network and business will keep running no matter what. With Peplink PrimeCare Advance, you can enjoy turn the Balance 30 Pro into a source of revenue and customer data. Use the Ad Delivery service to deliver advertisements and surverys to your customers before they connect to your Wi-Fi.
Futureproof SD-WAN Router for Small Businesses and Branches
02/10/2020
TRO620 Cellular and 802.11 Mesh Router
29/09/2020
Unbreakable Maritime Connectivity
23/09/2020
Configuring 1+1 Backup by High Availability (HA) on Peplink
23/09/2020